Marine N2 Nitrogen Generator 99.999 Purity

Monoblock on-site N2 nitrogen generator /Nitrogen generation system for Heat treatment industry

PSA technology utilizes two towers which are filled with carbon molecular sieve (CMS). Compressed air enters the bottom of the “online” tower and flows up through the CMS. Oxygen and other trace gases are preferentially adsorbed by the CMS, allowing nitrogen to pass through. After a pre-set time the on-line tower automatically switches to the regenerative mode, venting contaminants from the CMS. Carbon molecular sieve differs from ordinary activated carbons as it has a much narrower range of pore openings. This allows small molecules such as oxygen to penetrate the pores and separate from nitrogen molecules which are too large to enter the CMS. The larger molecules by-pass the CMS and emerge as nitrogen gas.

PSA nitrogen generators are typically used in applications where the purity requirement is higher than 99.5% (0.5% O2 or below).

PSA Nitrogen Generators are supplied to our customers as complete systems, ready for hookup to a compressed air supply, and include air filters and controls for automatic operation. Getting started with your PSA Nitrogen Generator is simple too – just start up the PSA nitrogen generators by a switch and you’re good to go. Maintenance is easy as well. You will only be required to change the filters on your PSA Nitrogen Generators every three to twelve months.

PSA nitrogen generators come pre-tested, fine tuned and inspected thoroughly to ensure that our generators are set up to meet the specific needs of our customers – as every application’s nitrogen flow rate and purity differ. One of the best things about PSA Nitrogen Generators are their ability to assist various businesses with on-site nitrogen production and the various applications PSA nitrogen generators are good for.

PSA Nitrogen Generators also assist businesses with eliminating risks that are typically associated with liquid nitrogen or highly pressurized nitrogen and the best part is – it’s extremely cost efficient.

Features and Benefits

• Unlimited flexibility: production capacity can be easily adjusted directly on site by simple module additions without any skilled personnel
• Compact dimensions for installations even in small or low ceiling spaces of your production facility
• Easy fleet management: all OSP models feature the same components, allowing a limited spare parts management and easy maintenance
• Non-corrosive materials such as aluminum and stainless steel, for all process components

Technical datas

• Purity : from 97% to 99,999%, residual O2 from 3% to 10ppm
• Flow : from 5 to 5000 Nm3/h
• Inlet pressure : from 7 to 13 bar

Design reference :

Compressed air inlet pressure 7.5 bar(g)/108 psi(g)

Air quality 1.4.1 according to ISO 8573-1:2010

Nitrogen outlet pressure 6 bar(g)/87psi(g)

Nitrogen quality 1.2.1 according to ISO 8573-1:2010.

Designed working temperature max 50 ℃

Dew point at Nitrogen outlet - 40 ℃

Notes:

OSP nitrogen generator max working pressure 10 bar(g)/145psi(g)

Following request of PSA on-site nitrogen generator will be customized :

Working pressure ＞10 bar(g)/145 psi(g)

Dew point ＜ - 50 ℃

Plug and play

Movable/containerized

Other special requirements as per site conditions

Applications

• Metal Industry
• Food & Beverage
• Packaging
• Vinification
• Laboratories
• Electronic

N2 nitrogen generator 99.999 purity

marine nitrogen generator

Marine N2 Nitrogen Generator

Marine N2 Nitrogen Generator 99.999 Purity Images